SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Used Parts for Forklifts
Used Forklift Parts - In the long run, forklift parts will wear and need to be replaced. Buying new components can become a pricey venture so another idea is to obtain used lift truck components. This could save a lot of money in the end. It is a good idea to acquire used lift truck parts that have been remanufactured. These parts will guarantee that you are getting parts that would work for a long time and be productive.
Remanufacturing worn out or broken components is a more cost effective method overall than rebuilding. With rebuilding parts, just the components that are worn out or broken get replaced, which means that other wearable components might break down soon after acquisition.
Remanufactured parts are cleaned after being taken apart and have the unusable parts changed. This method can provide the best assurance for second-hand parts. All wearable components are replaced regardless of age or wear which is another reason why reproduced components overall work so much better. Whatever component within the part is new and this provides much longer life to the second-hand part. Based on the forklift parts which are being redone, the cleaning process and the entire remanufacturing process will differ.
After complete disassembly, the engines are oven cleaned. Various parts of the engine like for example pistons, spark plugs, rings, filters, valves, and valve springs can be replaced during the remanufacture process. The engines are hot tested after reassembly to ensure that there are no leaks, no noises, no oil pressure problems or any vacuum.
Transmissions are disassembled, oven cleaned and pressure washed. A complete inspection is done in order to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement components utilized on transmission components meet OEM specifications.
A few parts like for instance the alternator, the water pump, torque converters, the starter and steer axles can obtain longer serviceability after being remanufactured and having all wearable components replaced. The electronic control in the electric forklift is maintained by the control card. This card can also be reproduced with replacing all aged and worn out parts. Unlike various forklift components the control card could only have the worn and aged components replaced.
Components which are remanufactured have to be comprehensively checked upon reassembly to guarantee they are in good condition previous to being sold. When obtaining these parts, it is a good idea to be sure that they have undergone all of the proper testing and inspections. On certain bigger parts like for instance transmissions, steer axles and engines, OEM specification replacement components should be utilized.
The lift truck dealer could guarantee that the parts they have reproduced meet the OEM specifications. This will even guarantee the parts meet industry standards. A lot of details go into remanufacturing used parts. This attention to detail provides more serviceability out of remanufactured parts compared to the parts that were simply rebuilt.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LaPlace, Louisiana
forkliftpartslaplace.com
Email Us
About Us